Jig Separator for Chrome

• Type：Beneficiation Machinery
• Feeding Size：6-30mm
• Condition：New
• Hutch Shape：Trapezoid, Rectangle
• Chamber Number：One &Two Chamber
• Hutch Volume：0.7 0.75m3, 1.04m3, 2.28m3, 4.33m3, 4.86m3

=== Base Info ===

• Model NO.：JT
• Capacity：1-15t,H
• Design：Saw-Tooth Wave
• Mining Object：Ore
• Transport Package：Nude in Container and Steel Frame in Bulk
• Specification：SGS, ISO9001: 2008
• Trademark：GANDONG
• Origin：Jiangxi, China
• HS Code：84741000
• Production Capacity：500,Year

=== Description ===

Basic Info.

Model NO. JT Capacity 1-15t/H Design Saw-Tooth Wave Mining Object Ore Transport Package Nude in Container and Steel Frame in Bulk Specification SGS, ISO9001: 2008 Trademark GANDONG Origin Jiangxi, China HS Code 84741000 Production Capacity 500/Year

Product Description

Features

Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation
Non-required power
Light in weight, anti corrosion, rust and wear resistant
Simple installation and Minimal maintenance requirements

Our Saw-tooth Wave Ladder Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.                      
 
Industrial tests carried our of Saw-tooth Wave Ladder Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw-tooth Wave Ladder Jig is raised by Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% than traditional Jig. The area reduces 1/3 and the stroke may adjust also.  

 
 
 
 
 
 
 
 
 
 

Ore dressing of our Saw-tooth Wave Ladder Jig is capable of handling almost full sizes of mineral materials other than very fine material. It features simple process operation, heavy duty equipment handling capacity with final products being obtained through one time separation.