Laboratory Grinding Sample Pulverizer Machine for Ore

• Type：Ball Mill
• Motor Type：AC Motor
• Motor Power：1.1kw
• Rotationl Speed：1300rpm
• Application：Mine
• Materials：Minerals

=== Base Info ===

• Model NO.：2MZ-100
• Condition：New
• OEM：Yes
• Transport Package：Wooden Case
• Specification：530*530*800mm
• Trademark：WKD
• Origin：China
• HS Code：8474100000
• Production Capacity：1000sets,Month

=== Description ===

Basic Info.

Model NO. 2MZ-100 Condition New OEM Yes Transport Package Wooden Case Specification 530*530*800mm Trademark WKD Origin China HS Code 8474100000 Production Capacity 1000sets/Month

Product Description

Introduction
 Laboratory sealed sample pulverizer / lab sample grinder / lab sample grinding mill is a small lab grinding machine for grinding the ore/material samples into powder, which has been widely used in the laboratory of the geology, mining, metallurgy, coal, power, chemistry and building industries, for the none pollution sample testing.

The sealed pulveriser gets an "automatic dust proof" and a "pot anti-loose" device, which provide the machine advantages of low noise, no dust, and easy operation.

The machine adapt high frequency vibrating grinding method to make the power fine and event, no need screening and shrinking, prevent sample mixing.

This machine gets a simple structure, nice outlook , small volume, with a high efficiency, the output material is fine and evenly, which could meet the demand of education and research department. no need install and adjusting. Could be used in any location, it's one of the best sampling machines for laboratory use.


Features
1. High efficient no need screening again, the output material could be used for testing directly.
2. Digital timing screen, special designed high quality motor, with long service life.
3. With shock-absorbing stand.
4. Sealed grinding pot, dust proof, no pollution.
5. Low noise, smooth operating, complete sealed machine, with high safety operation standard.
6. High standard sealing design, no leaking for dry or wet method grinding.
7. Reliable, evenly output size, short grinding time. 
8. Simple and reasonable structure, good out look, easy to operate, maintenance, and clean.

Technical Parameters

model	feeding size(mm)	weight of charge(g)	discharge granularity(mesh)	grinding time(min)	motor power(kw)	total weight(kg)	overall size(mm)
GJ-I	<12	100	120-200	1-3	1.1	145	640*560*730
GJ-II	<25	200(400)	120-200	1-3	1.1	225	800*740*910
GJ-AX	<12	700	120-200	2-5	1.1	300	800*740*910
GJ500-1	<25	500	120-200	1-3	1.1	280	800*740*910
GJ-IA(MZ-100)	<12	100	100-200	1-3	1.1	115	550*540*750
2MZ-100	<12	2*100	100-200	2-4	1.1	150	530*530*800
3MZ-100	<12	3*100	100-200	2-4	1.1	160	530*530*800
4MZ-100	<12	4*100	100-200	2-5	1.5	260	740*740*950
5MZ-100	<12	5*100	100-200	2-5	1.5	270	740*740*950
6MZ-100	<12	6*100	100-200	2-5	1.5	280	740*740*950
7MZ-100	<12	7*100	100-200	2-5	1.1	300	740*740*910
1MZ-200	<20	200	100-200	2-4	1.1	150	530*530*800
1MZ-400	<25	400	100-200	2-5	1.1	280	740*740*910
MZ-1000	<12	1000	100-200	2-5	1.1	239	740*740*910
2MZ-200	<20	2*200	100-200	2-5	1.5	257	740*740*950
2MZ-400	<25	2*400	100-200	2-5	1.5	257	740*740*950
3MZ-200	<20	3*200	100-200	2-5	1.5	265	740*740*950
3MZ-400	<20	3*400	100-200	2-5	1.5	280	740*740*950
4MZ-400	<20	4*400	100-200	2-5	1.5	278	740*740*950
4MZ-200	<20	4*200	100-200	2-5	1.5	278	740*740*950
LMZ-120	<12	continuous loading unloading	120-320	2-5	1.1	160	520*520*1030

Working principle 

working principle is vibration milling type, materials feed into the pot, high speed spinning crushingring and hammer will grind the material ready within 1-5 minutes.The input materials should be brittle, and dry, out put size is between 80-200 mesh, if require even finer size, the machine can be designed according special requirement.

Detailed Images






Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. 

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:

Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant


Package: FCL & LCL export standard container 20GP/40GP/40HQ. 

FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed. 

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery 

We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured. 

Delivery time: shipped in 15 days after payment


FAQ

1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.

2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.

3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.


Our Service

1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.


Contact

JiangXi Victor International Mining Equipment Co.,Ltd
Tel/Fax: 86-797-5712751 
Mob: +86 133 6177 9811
 
 
Add:Guzhang industrial park,Shicheng county,Ganzhou city,Jiangxi Province,342700,China.